Felco - cutter

You are here : Felco > cutter

TexteMenu1

Felco

Light and easily handled, it cuts easily through a hardened steel wire 4 mm (0.2 in.) in diameter, steel cable up to 9 mm (0.4 in.), and metal rods and spring steel wire. Hardened steel blades and centre bolt, unbreakable forged aluminium alloy handles with plastic covering for good grip.length: 325 mm (12.8 in.) weight: 750 g (26.5 oz.) - FELCO C9 - ref FLC-C9

FELCO C9
ref: FLC-C9

Two hand cutter for cutting steel cables up to 12 mm (0.5 in.) in diameter. Also recommended for cutting metal rods and spring steel wire. Optimum cutting yield thanks to the shape of the handles and special steel blades. A cutting tool capable of satisfying the most varied industrial requirements. Hardened steel blades and centre bolt, unbreakable forged aluminium alloy handles with plastic covering for good grip length: 500 mm (19.7 in.) weight: 1500 g (52.9 oz.) - FELCO C12 - ref FLC-C12

FELCO C12
ref: FLC-C12

Two hand cutter for cutting steel cables up to 16 mm (0.6 in.) in diameter. Also recommended for cutting metal rods and spring steel wire. Optimum cutting yield thanks to the shape of the handles and special steel blades. A cutting tool capable of satisfying the most varied industrial requirements. Hardened steel blades and centre bolt, unbreakable forged aluminium alloy handles with plastic covering for good grip. length: 590 mm (23.2 in.) weight: 2300 g (81.1 oz.) - FELCO C16 - ref FLC-C16

FELCO C16
ref: FLC-C16

Derived from the C16, this cutter is distinct for its special blades designed for cutting unarmoured electroniccables with and without steel cores, up to 20 mm (0.8 in.)in diameter. length: 590 mm (23.2 in.) weight: 2300 g (81.1 oz.) - FELCO C16E - ref FLC-C16E

FELCO C16E
ref: FLC-C16E

Derived from the C16, this cutter is distinct for its special blades designed for cutting unarmoured electroniccables with and without steel cores, up to 20 mm (0.8 in.)in diameter.length: 590 mm (23.2 in.) weight: 2300 g (81.1 oz.) - FELCO C108 - ref FLC-C108

FELCO C108
ref: FLC-C108

Two-hand cutter recommended for the cutting of very hard materials. The cutter is equipped with a force transmission system, which allows the cutting force generated by the user to be increased and thus facilitates cutting of cables and metal rods up to 12 mm (0.5 in.) in diameter. A cutter principally intended for use in the oil industry, forestry, power, transport and telecommunications, but also used on yachts and in ports. Hardened steel blades and centre bolts, unbreakable forged aluminium alloy handles with plastic covering for good grip. length: 730 mm (28.7 in.) weight: 3600 g (127.0 oz.) - FELCO C112 - ref FLC-C112

FELCO C112
ref: FLC-C112

Back to boutique index

Top of page

Accueil | Heidi-Shop | Search | Mon caddie | Help-infos
Engraving | Contact us | Sales conditions | B to B

© since 1998 www.swiss-knife.com | www.heidi-shop.com | www.coutelleriedupetitchene.ch | Swiss army knife shop | made in Switzerland